Available in a variety of material types and formulations, each material is designed to provide specific absorption characteristics.
Wavexorb absorbers are formulated by combining silicone, nitrile, urethane, or foam matrix with magnetic and carbon filler materials. Available in sheet form, with or without pressure sensitive adhesive (PSA).
Electronic devices and systems continue to be designed to run at increasingly higher clock speeds while at the same time being reduced in size.
THERMAWORX Thermal interface materials offer excellent thermal transfer properties across a wide gap range and are available in several formulations.
These versatile materials can be a cost effective solution compared to alternative methods for shielding enclosures.
Provided in six material combinations and in multiple configurations, the material is used extensively in military, medical and aerospace markets.
With many sizes and materials to choose from, Knitted Wire gaskets can be used to ground enclosure seams and joints inside or outside of a groove.
FLEX is 3G’s most widely used board level shield and offers engineers unlimited design flexibility with virtually no size limitations.
Flex shields are designed for both surface mount and through hole applications.
WAVESEAL Conductive Shielding Fabric provides an economical solution to applications requiring excellent electrical conductivity across substrates.
Features: high shielding performance ,light weight, abrasion resistant, and low cost.
WAVESEAL Conductive Foam shielding material is suited for applications requiring excellent shielding effectiveness and low closure force.
This cost effective solution consists of two layers of highly conductive and tear resistant polyester fabric covering one layer of conductive polyurethane foam.
Part of our WAVESEAL brand, Elastomer Core is offered by the foot and can be easily spooled for handling.
Can be cut to specific length, or spliced into a custom gasket for easy installation.
To increase heat dissipation between hot area and cooling device such as a heat sink, THERMAWORX materials are used.
These silicone based materials work by displacing the air in uneven areas with highly conductive material yielding increased cooling.
What is an absorber?
An electromagnetic absorbing material is one whose electrical or magnetic properties have been altered to create a situation where energy is turned into heat, rather than transmitted or reflected.